Adaptador molex photos

Whether you are wearing an older computer without a single USB 3.0 port or would like to extend and refine the list of USB 3.0 ports on the newest equipment, we’re here to help.
Read on as we describe how to pack in all the USB goodness you crave with back, front, and the ports of cases.

Why you do this to me?

If you already have one or two USB 3.0 port on your computer, you can skip this section practically: you already know how great USB 3.0 and you’re here for. If you are thinking of upgrading an old computer to support USB 3.0 you may not realize how many USB 3.0 offers enhancements over USB 2.0.

RELATED ARTICLE

These are the hardware components used in the process of renovation of both teams.

The HT-PC002 HooToo SuperSpeed USB 3.0 ports adaptador molex 2 19-Pin Header PCI-E add-on card, 17 HooToo HT-PC001 4 SuperSpeed USB 3.0 PCI-E add-on card, 16 RDCR-11004 Rosewill USB Multi-Port ports and Card Reader Expansion Bay 30 The first two pieces of hardware are expansion cards to be inserted into a PCI-E open on your computer to operate slot. The third element of the list is an expansion bay that allows you to activate an unused drive bay 5.25 in a card reader and USB hub media.

There are two important considerations when buying a USB 3.0 expansion card. Take a moment to look at the details of hardware to ensure you choose the right card for your needs.

First, you always want to buy a card that includes a power connector of some sort (some cards have a power connector 4-pin Molex and most typically come with a Molex to SATA adapter and some have a SATA power adapter board). Never buy a USB 3.0 expansion card that lacks a power adapter as PCI expansion slot can not supply enough energy to meet the demands of a full load USB 3.0 card. In the picture below you can see the molex power port, the port milky adaptador molex white 4-pin right in HooToo-PC002.

Second, if you need to connect the USB 3.0 ports on your case or in any expansion of the bay (such as Rosewill model listed here) you need a header on the motherboard or USB card is needed 19 – pins that can accept a USB 3.0 internal male cable. Again, referring to the picture above, you can see the header in blue on the left side.

Now let’s look at the actual process to highlight where you want to use every piece of hardware you through the update process for both teams.

Upgrading an older computer

The first team are updating is an old machine that is still going strong. We recently transplanted motherboard from its original case (a case Media Center PC) into a new mid tower case. The new integrated case, a front panel USB 3.0 port fun but unfortunately the motherboard circa-2006 is not compatible with USB 3.0 and has 19-pin header cable to connect case.

That should be no surprise that the motherboard precedes the first USB 3.0 compatible mother for about four years cards. The board, as expected, also lacks any rear USB 3.0 ports (and has many USB 2.0 ports for that matter) which makes it a perfect candidate for a USB expansion card with a 19-pin header. If you have a computer with an older motherboard, but a more recent case with USB 3.0 ports, an expansion card with a port header, as HooToo HT-PC002 is a must if you ever want to get that If port up and running.

Card in hand it’s time to crack open the case and get to work. The photograph above shows ed empty PCI-E slot we will use for the new card. Installing a new PCI card is one of the easiest tasks of renovation of equipment on this side of the connection of a new stick of RAM, but you still need to handle everything carefully. Be sure to follow Electrostatic basic safety guidelines like wearing shoes with rubber sole on a nonconductive surface (wool socks and a furry carpet is a bad idea), keep the box the computer connected to a ground ( but off), so you can use the same case as a point of grounding for any office in your body, and leave the card in the bag electrostatic shipment until you have connected to ground yourself and you are ready to install.

Installation is a breeze. Remove the slot protector box (perforated metal piece that protects the opening when a card is not inserted, looks white and the left in the picture above). Gently push the expansion card and make sure the metal bracket to the case with the same screw previously held in the guard slot. Connect the power cord and the USB 3.0 male internal cable. The resulting configuration should look like this.

Close the case and start the computer. USB expansion card plugs in them almost always require additional drivers to interact with the motherboard. Load drivers from the included CD or downloaded from the manufacturer’s website to complete the installation process.

Your motherboard is now more USB 3.0 ports on the back and interfaces with USB 3.0 ports on the case through the top of the USB card.

Extending a recent computer

In the previous section we added the USB 3.0 functionality to a team that had no capacity to USB 3.0. In this section we are expanding the USB 3.0 capabilities of a computer that already has support for USB 3.0. The motherboard in our second team is a late 2013 motherboard oriented game that features 3.0 ports on the back and one USB 3.0 header on the board both USB.

The upgrade path in this particular machine focuses on adding more USB 3.0 ports on the back, as well as expanding the functionality of the box by replacing an old reader hub adaptador molex USB 2.0 card (shown in pictured above) with a front compartment unit with a new USB 3.0 reader.

As in the previous section will have to open the case, look for an empty PCI-E slot, and, of course, obey the same rules for protecting your computer against electrostatic discharge. As the PCI-E and the slot for the insertion process is identical, you can reference the photos in the previous section.

Unlike the previous card, however, the HooToo HT-PC001 has no pin header aboard an internal USB 3.0 adaptador molex it only requires a single cable to connect the molex power cable to the card.

Instead we are going to connect the USB cable from the hub Rosewill directly on the motherboard, as shown in the photo above. In addition to connecting the USB 3.0 cable, the center also has Rosewill USB 2.0 ports and an eSATA port. The cable to the eSATA port can be connected to a standard SATA port of motherboard (if you have a spare port) and allows you to connect up hard drive bays and some external hard drives directly to the center for SATA transfer speed. The USB 2.0 cable only has to be inserted into a USB 2.0 header on the adaptador molex The USB 2.0 ports are 9-pin ports that the younger brother of 19-pin port just connect the USB 3.0 cable to resemble.

Once all the appropriate ports are connected, it’s time to put the case back together and admire our practical work.

The old USB 2.0 moribund downtown is gone, the new is installed, and have an additional 4 ports on the back of the machine. Not a bad return of less than ten minutes worth of time and less than 50 parts.

Unlike the previous update, where he installed a new USB 3.0 host, this time simply add more USB 3.0 functionality to a team that already adaptador molex no driver installation required.

That’s all about it! The hardest part of the whole process of updating the USB 3.0 is simply take the time to find the necessary hardware. You’ll spend more time to check the specifications of the motherboard and select the appropriate hardware that you will actually install the expansion card and adaptador molex or USB 3.0 hub on your machine.

adaptador molex allows, adaptador molex always, adaptador molex details, adaptador molex drivers to interact, adaptador molex focuses, adaptador molex guidelines, adaptador molex minutes, adaptador molex particular, adaptador molex photos, adaptador molex previous, adaptador molex protects, expected adaptador molex, listed adaptador molex, unused adaptador molex